现浇防撞墙模具主要是在高速公路上，防撞墙的使用，有效的解决了路上部分的问题，随着我国对公路上的防护意识的提高的，现浇防撞墙在各大公路上使用的越来越广泛了，防撞墙的建造更多的是考虑到了的问题。
随着技术的进步高速公路建设的数量也越来越多了，桥梁上的高速、穿山高速等等都是非常多，尤其是车辆在夜间行驶时，隐患大大提高了，所以防撞墙这这种防护措施是必不可少的，现浇防撞墙模具可以根据公路的等级、需要的防撞标准、以及当地的环境特点来进行尺寸的选择的，一般该的模具根据施工方要求的经济性、结构进行制作，一般模具上的筋板数量多他的支撑力就会更强一些的，一般的在施工时的，混凝土的压力是通过面板的传导给筋板的，所以筋板数量和分布的状态都是非常重要的。
现浇防撞墙模具的可以根据他的使用性能和工程标准来对他的位置进行设置划分，一般是可以放到高速的两侧或是中间位置的，都是为了在车辆发生事故起到防撞的效果。The cast-in-situ anti-collision wall mold is mainly used on the expressway. The use of the anti-collision wall effectively solves the safety problems on the road. With the improvement of China's awareness of highway protection, the cast-in-situ anti-collision wall is widely used on major highways
It is used more and more widely. The construction of anti-collision wall takes into account the problem of safety.
With the progress of technology, the number of expressway construction is also increasing. There are many Expressways on bridges and mountain crossing expressways, especially when vehicles drive at night, the potential safety hazards are greatly improved, so the anti-collision wall
Such protective measures are essential. The size of the cast-in-situ anti-collision wall mold can be selected according to the grade of the highway, the required anti-collision standards and the local environmental characteristics. Generally, the mold can be selected according to the requirements of the construction party
Generally, when the number of reinforcement plates on the mold is large, its supporting force will be stronger. Generally, during construction, the pressure of concrete is transmitted to the reinforcement plate through the panel, so the number of reinforcement plates is large
And the state of distribution are very important.The position of the cast-in-situ anti-collision wall mold can be set and divided according to its service performance and engineering standards. Generally, it can be placed on both sides or in the middle of the high-speed in order to prevent vehicle accidentsImpact effect.